To arrange a free no-obligation survey and estimate, Contact: Adrian 07703721580 or Tel: (01656) 663129 and leave a message, we will return your call to arrange an appointment.
All of our timber is Russian Redwood, sourced from well-managed sustainable forests. The timber is kiln dried and pressure treated with Tanalith E.
Deck boards are grooved primarily to provide greater grip. Our deck boards are grooved on both sides to stress relieve the timber and reduce cupping. The boards are 120mm x 32mm and can be fitted either way up, giving a choice of two anti-slip profiles.
Our balustrade is designed to be strong, durable and aesthetically pleasing. It is constructed using four basic components, newel posts (90mm x 90mm) which can be cut to lengths up to 3.6m, upper and lower sub-rails (70mm x 35mm), hand rail (150mm x 28mm) and square spindles (32mm x 32mm). All of these materials are planed smooth and corners rounded prior to treatment. For greater strength and rigidity, we would recommend that the newels are built into deck support frame and not bolted on to the side of the deck.
Short balustrade installed on a low level deck can improve the overall appearance of your deck, whilst being less restrictive on your view, particularly when you are sitting, it is also strong and wide enough to use as bench seating.
Ranch style balustrade can be installed for a rural rustic appearance.
Elevated decks can look fantastic and cost less than building a raised concrete or paved patio area.
The ground level on this project did not allow room to install the deck framing. To avoid the cost of excavating the whole area for this deck, only the step area was excavated. The finished job looked fantastic and the cost was reduced considerably.
TGV Cladding can be used to close in the underside of elevated decks, this can improve the appearance and hide unsightly support posts and brickwork etc, it also prevents inquisitive children and pets from getting trapped. Access panels or doors can be installed allowing under deck storage.
Sunburst or Mosaic decorative panels can be incorporated in to standard height balustrade, giving your deck a completely different look.
Steps can be incorporated into the design of your deck, either extended on to the front or side, or cut into the deck platform.
We design and install bespoke pergolas, wall mounted, free standing or built into your deck, we can also attach an all weather polycarbonate roof. The support posts are 90mm x 90mm planed smooth and corners rounded prior to treatment. The pergola rails are 90mm x 32mm with the same smooth finish.
At the framing stage of your deck installation, all the necessary cables for your deck and garden lights can be routed.
Note: Final connection must be carried out by a qualified electrician.
We also install fencing, bespoke trellis, arches arbours, gates, log cabins, decorative aggregates and landscaping bark etc.
Copy Right All images shown on this site are copy right © protected and should not be copied or used without written permission.